Pipe Fittings

2,339 found, showing page 79 of 156

$11.99
1/2" 45deg Elbow

1/2", 45 Degree Elbow, Connects Any Combination Of Copper, Pex, CPVC Or PE-RT Pipe Together To Form A 45 Degree Connection, Ideal For Hard Piping Applications Where 90 Degree Bend Is Too Much, With No Soldering Clamps Unions Or Glue Required, Simply Insert The Pipe Into The Fitting Deep Enough To Be Sealed By Our Specially Formulated Oring, Push To Connect Fitting Is Designed For Potable Water & Radiant Heating Applications With No Access Panels Required, Rated Up To 200 Degrees Fahrenheit & 200 PSI.

$15.49
3/4" 45DEG Elbow

SharkBite 3/4" 45-Degree Elbow. It connects any combination of copper, PEX, CPVC or PE-RT pipe together to form a 45-Degree connection. It is ideal for hard piping applications where 90-Degree bend is too much. No soldering, clamps, unionsor glue required. Simply insert the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Push to connect fitting is designed for potable water & radiant heating applications with no access panels required. Rated up to 200 degrees Fahrenheit & 200 PSI.

$4.99
3/4x1 Pex Barb Coupling

3/4" x 1", Sharkbite RT Pex Barb Reducing Coupling, Made Of Lead Free DZR Brass, Easy To Install, Allows For You To Reduce Pipe Size With 1 Fitting, Compatible With Potable Water Distribution & Hydronic Heating Applications, Can Be Used In Both Stainless Steel Clamp Systems Or A Copper Crimping System, ASTM F1807, SNF/ANSI 61, NSF 372 Approvals.

$22.99
100PK 1/2" Crimp Ring

100 Pack, 1/2", Copper Crimp Ring, Used To Install Barbed Fittings With Pex Pipe, Barbed For Installing Inside The Pex Pipe & A Crimp Ring Is Used On The Outside For The Pipe To Make A Secure Connection, Bulk.

$32.99
100PK 3/4" Crimp Ring

100 Pack, 3/4", Copper Crimp Ring, Used To Install Barbed Fittings With Pex Pipe, Barbed For Installing Inside The Pex Pipe & A Crimp Ring Is Used On The Outside For The Pipe To Make A Secure Connection, Bulk.

$16.99
4" 22-1/2deg Hxh Ell

4", ABS/DWV 22-1/2 Degree, Hub x Hub Ell, Used To Make A 22-1/2 Degree Turn In A Waste Line, For Non-Pressure Drain, Waste & Vent Installation, Low Chemical Resistance, Black Material.

$8.49
1x12 Galv Nipple

1" x 12" Galvanized Nipple.

$5.99
1-1/2x1-1/2x3/4 Ins Tee

1-1/2" Barb x 1-1/2" Barb x 3/4" Female Iron Pipe Insert Tee.

$3.29
1x1-1/2" Red Adapter

1" Insert x 1-1/2" Male Iron Pipe, Reducing Male Adapter.

$1.99
3/4 Poly Fpt Elbow

3/4" Poly Female Pipe Thread Insert Elbow, Insert x Female.

$4.49
1-1/4xclose Galv Nipple

1-1/4" x Close, Galvanized Nipple.

$1.79
1/2 Poly Fpt Insert Tee

1/2" Poly Female Pipe Thread Insert Tee, Plastic x Plastic x Female.

$1.49
3/4x3/4x1/2 Fpt Tee

3/4" x 3/4" x 1/2" Poly Female Pipe Thread Insert Tee, Plastic x Plastic x Female.

$3.49
1-1/4x2 Galv Nipple

1-1/4" x 2" Galvanized Nipple.

$1.49
3/4 Poly Fpt Insert Tee

3/4" Poly Female Pipe Thread Insert Tee, Plastic x Plastic x Female.